Shut-Off Valves

EDR

Generally we produce weld-in valves for applications with an operating temperature up to 1100°C. Upon request we manufacture the EDR with plain flanges or thread ends measured in inches.

EDR - Standard Configuration
Sizes (DN) 17,3 - 533 (up to 2000 possible as a custom order)
Type Weld-in valve
Standards -
Operating Temperatures -100°C up to +1100°C
Operation options
  • With free shaft-ends
  • Manual operation with a grid handle with locking mechanism
  • Continuously variable fine adjustment
  • A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  • With an attached actuator (pneumatic, electric or hydraulic)
EDR - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% impermeability compared to fully opened disk
Sealing Air Up to 100% impermeability

More Information

JASTA Valve EDR / Product Brochure PDF File

Download

References

  • KELLER HCW GmbH, Ibbenbüren-Laggenbeck
  • Claudius Peters Projects GmbH, Buxtehude
  • VENTAPP GmbH, Kempen
  • Wiedemann Industriebrenner GmbH, Stockach / Raithaslach

FLD-16

The flange throttle valve type FLD-16 with flanges drilled according to DIN 1092-1 PN-6, PN-10 or PN-16, is installed in pipelines. This valve is characterized by its robust and heavy construction and works reliably even in difficult environments.

Depending on the application (temperature, medium, pressure), we can customize this valve of almost any material available on the market.

With our three sided coated sealing gasket we can offer an impermeability of at least 99,95% as compared to the fully opened disc even at high pressure. To achieve a leakage rate of 0%, the valve will be charged with sealing air.

FLD-16 - Standard Configuration
Sizes (DN) 15 – 2000 (up to 5000 possible as a custom order)
Type Flange valve
Standards DIN 1092-1 PN6 – PN16 as a standard up to PN 100 feasible
Operating Temperatures -100°C to +1100°C
Operation options
  •  With free shaft-ends
  •  Manual operation with a grid handle with locking mechanism
  •  Continuously variable fine adjustment
  •  A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  •  With an attached actuator (pneumatic, electric or hydraulic)
FLD-16 - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% impermeability compared to fully opened disk
Sealing Air Up to 100% impermeability

More Information

JASTA Valve FLD-16 / Product Brochure PDF File

Download

References

  • HERING AG, Gunzenhausen
  • HESCH Industrietechnik GmbH, Fürth
  • Ventilatorenfabrik Oelde GmbH, Oelde

GD-6

Depending on your application (temperature, element, pressure), we manufacture this valve from any material available on the market. Customized solutions regarding size, operation or element are possible upon request.

GD-6 - Standard Configuration
Sizes (DN) 15 – 2000 (up to 5000 possible as a custom order)
Type Clamp-in
Standards EN 1092-1, PN-6 / PN-10 / PN-16, ANSI B 16.5 - 150 lbs / 300 lbs / 400 lbs
Operating Temperatures -100 to +1100°C
Operation options
  •  With free shaft-ends
  •  Manual operation with a grid handle with locking mechanism
  •  Continuously variable fine adjustment
  •  A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  •  With an attached actuator (pneumatic, electric or hydraulic)
GD-6 - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% to 99,8% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% to 99,98% impermeability compared to fully opened disk
Sealing Air Up to 100% impermeability

More Information

JASTA Valve GD-6 / Product Brochure PDF File

Download

References

  • BÜTTNER Gesellschaft für Trocknungs- und Umwelttechnik mbH, Krefeld
  • Loesche ThermoProzess GmbH, Gelsenkirchen
  • Riedhammer GmbH, Nürnberg

LDK-1

The throttle valve type LDK-1 is a lightweight valve in the fields of control technology and shut-off technology. They are clamped between flanges according to DIN 24154 T2R2/R4 in pipelines. The valve LDK-1 stands out due to its compact and lightweight design. It can handle differential pressure up to 100 mbar.

According to your application (temperature and medium), we produce the LDK-1 in any material available on the market. The standard mounting position of the valve is provided with horizontal shaft, but customized solutions are available on request.

LDK-1 - Standard Configuration
Sizes (DN) 63 - 1000 (intermediate sizes viable)
Type Clamp-in
Standards DIN 24154 T2R2/R4
Operating Temperatures -100°C bis +1100°C
Operation options
  • With free shaft-ends
  • Manual operation with a grid handle with locking mechanism
  • Continuously variable fine adjustment
  • A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  • With an attached actuator (pneumatic, electric or hydraulic)
LDK-1 - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% impermeability compared to fully opened disk
Sealing Air -

We implement the gasket seal for sizes from DN 100 to DN 315.

More Information

JASTA Valve LDK / Product Brochure PDF File

Download

References

  • EBNER Industrieofenbau Gesellschaft m.b.H., Leonding / Österreich
  • KGO GmbH, Wetter
  • Recker Ziegelwerk Berentelg & Hebrok OHG, Recke
  • TANN Europe GmbH, Essen

LDK-4

The flange-throttle valve type LDK-4 is mounted between flanges according to DIN 24154 T2R2 in pipelines. The valve LDK-4 stands out due to its compact design and can handle differential pressure up to 100 mbar. We can produce this valve from any materials available on the market, depending on the application (temperature, medium, pressure).

With our three sided coated sealing gasket we can offer leakage rates of max. 0,05% of Kv 90°. To achieve a leakage rate of 0%, the valve will be equipped with a double jacketed gasket and charged with sealing air.

The mounting position of the valve standardly is provided with horizontal shaft, but upon request customized solutions are available.

LDK-4 - Standard Configuration
Sizes (DN) 63 – 2000 (up to 3000 possible as a custom order)
Type Flange valve
Standards DIN 24154 T2R2/R4 (every pattern of drilling available upon request)
Operating Temperatures -100°C to +1100°C
Operation options
  • With free shaft-ends
  • Manual operation with a grid handle with locking mechanism
  • Continuously variable fine adjustment
  • A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  • With an attached actuator (pneumatic, electric or hydraulic)
LDK-4 - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% impermeability compared to fully opened disk
Sealing Air Up to 100% impermeability

More Information

JASTA Valve LDK / Product Brochure PDF File

Download

References

  • EBNER Industrieofenbau Gesellschaft m.b.H., Leonding / Österreich
  • KGO GmbH, Wetter
  • Recker Ziegelwerk Berentelg & Hebrok OHG, Recke
  • TANN Europe GmbH, Essen

RA

The valve type RA has a flange connection based on DIN 24193 T3, but other patterns of drilling are feasible on request.

Depending on the application (temperature, medium, pressure), we can customize this valve of any steel available on the market. With our three sided coated sealing gasket we can offer an impermeability of at least 99,95% as compared to the fully opened disc. To achieve a leakage rate of 0%, the valve will be charged with sealing air.

The mounting position of the valve standardly is provided with horizontal shaft, but upon request customized solutions are available.

RA - Standard Configuration
Sizes (DN) 63x63 bis 5000x5000 (intermediate sizes viable)
Type Flange valve
Standards DIN 24193 T3 (other patterns of drilling available upon request)
Operating Temperatures -100°C bis +1100°C
Operation options
  • With free shaft-ends
  • Manual operation with a grid handle with locking mechanism
  • Continuously variable fine adjustment
  • A corresponding shaft adaption with the DIN ISO 5211 mounting kit
  • With an attached actuator (pneumatic, electric or hydraulic)
RA - Closing Types and Impermeability Classes
Swing Through 99% impermeability compared to fully opened disk
With a Stop Bar in the Body 99,5% impermeability compared to fully opened disk
With a Stop Bar and Gasket 99,95% impermeability compared to fully opened disk
Sealing Air Up to 100% impermeability

More Information

JASTA Valve RA / Product Brochure PDF File

Download

References

  • Bernd Münstermann GmbH & Co. KG, Telgte
  • Hertwich Engineering GmbH, Braunau am Inn
  • ANDRITZ Maerz GmbH, Düsseldorf